   |
Affiliate
Signup
Affiliate Login
|
Customer
Testimonials
Guys,
Is that all I have to do?
That was the question I was asking myself.
I received my cover yesterday. Got home and in less than 10
minutes it was
installed and I was playing with reckless abandon.
I have four mates all waiting to see how I went. I can
guarantee you will have at least four orders in the next couple
of weeks.
Well done on an innovative yet extremely easy to install and use
product.
Extremely happy.
Thanks!
Read More... |
|
|
|
WiiKey Installation Instructions
Quickly and Easily Install The WiiKey Mod Chip In your Nintendo
Wii.
|
 |
Our Price:
$29.74
Availability: In Stock. Ships in 2-5 Days
FREE
Wire Kit With Every WiiKey Mod Chip.
Professional Pre-Cut / Pre-Tinned Wires, Enough Solder
for Wiring The WiiKey, Solder for Quick Solder
Installation.
A $12.00 Value, Yours absolutely
FREE!
Read the WiiKey Installation
instructions, and when you're ready,
you can purchase
the WiiKey Nintendo Wii Mod Chip by
clicking on the Buy Now button below.
|
|
| WiiKey Installation |
Unlock your Nintendo Wii with the worlds first truly upgradeable Nintendo Wii
Mod Chip. That's the manufacturer "hype" for the Wiikey. And it's all
true. Thankfully in the case of this Nintendo Wii Mod chip, it's not just
all hype and senseless features, but a robust, good chip that just works.
Installing the WiiKey is as easy as can be. Even if you're just a novice
when it comes to soldering, you should have no problem with installing the
WiiKey in your Nintendo Wii console.
The really good thing, as far is goes with the WiiKey Installation is that
you're only required to work with just one section of the Nintendo Wii mother
board. And what's even better is the fact that you don't need any wires
for the WiiKey Install at all. The WiiKey instructions do not show any
required wires, nor do you have to install any wires. The Wiikey is
installed by way of quick solder pads, much like the DuoX 3
Xbox Mod Chip
was installed, simply by placing the chip over the correct points, and putting
solder on the quick solder pads which then connected the chip to the motherboard
of the console. The WiiKey install is exactly the same. Instead of
having to wire up your mod chip and put wires inside your Nintendo Wii system,
the WiiKey also uses the quick solder pad method.
As mentioned earlier, the ease of installation of the WiiKey chip is that you
don't need wires, and that you're only working with one part of the Nintendo Wii
Motherboard. The image below shows the area on the Nintendo Wii
Motherboard that you'll be working with.
 |
WiiKey Instructions - What
do you need? |
- You'll need a soldering iron. 15W max will do just fine.
These can be found in most major electronics retailer shelves, like
Radio Shack, The Source, Circuit City, etc..
- The installation diagrams (found below under the download link)
- A Tri-Wing Screw Driver, though you can use a regular STAR /
Phillips Screw Driver as well, these tend to fit, and you can open
you Nintendo Wii quite easily.
- Solder with Flux. Again, RadioShack in the US / Canada and
many Electronics retailers world wide carry solder.
Now that you have everything you'll need to open your Nintendo
Wii system, and install the
WiiKey mod chip, you just have to place the WiiKey on
the correct spot on the Wii motherboard. This is quite easy
and painless. You can hold it in place, firmly, with one hand
while putting the soldering iron over the quick solder pads, and
melting the solder until the WiiKey stays in it's place. Once
you've soldered it with just one of the quick solder pads, you can
stop holding it, as the solder will hold it in place for you.
Look at the image below closely, to determine where you MUST place
the WiiKey mod chip. It's vital that you install the WiiKey and
solder the quick solder pads to the correct place on the Wii
Motherboard. Soldering them anywhere else could entirely ruin your
Wii system. With the clear and detailed installation diagram,
you'll be able to place the WiiKey on the exact spot on the main board
of your Wii.
The WiiKey has either circular or small square quick solder pads.
We recommend that you first take your solder and soldering iron, and
apply some solder to each of the pads. This will make it much
easier when you're actually installation the WiiKey. Because
you'll have pre-soldered the quick solder pads, when you again place
your soldering iron on the pads when installing the modchip, it will
quickly melt the solder and connect it with the corresponding points on
the Wii motherboard.
That's it, you're done. Taking apart your Nintendo Wii is
probably the hardest / most challenging part of the WiiKey install.
The modchip install so easily that even a novice can complete the
installation in 15 minutes or less.
For more information on the WiiKey and it's features and functions,
please visit our
WiiKey product page.
|
Package Contents When Your
Order You WiiKey Mod Chip |
- 1 x WiiKey Nintendo Wii Mod Chip
- Packaged in Anti Static Professional ESD Packaging.
- Online WiiKey Installation Instructions.
|
Download the WiiKey Installation Instructions |
|
|
Will the WiiKey Wii Mod Chip
Work In Your Wii? |
|
The WiiKey Mod Chip is compatible with all current models of the
Nintendo Wii Console. These include USA, PAL and JAPANESE
Wii Consoles world wide. There is absolutely no need to
check your Wii Model Number. The WiiKey Mod Chip will work
in your machine. |
|
Blue = Compatible
| |
|
|
| |
|
| "Playstation" & "PS2" are trademarks of Sony Computer Entertainment Inc (SCEI). This Web site is NOT affiliated with SCEI. |
