|
DuoX 2 Chip
Diagrams
Please use "Right Click" and "Save as" (each diagram is around 500k.)
Xbox (Pal, US, Asian, Jap)
Version 1.0
Version 1.1
Version 1.2 and Version 1.3
Version 1.4
Version 1.5
Version 1.6
Please note that the Chip can have either of the following
printed on it. AMD, HYUNDAI, FUJITSU
Installing pin socket to chip. (diagrams are by Arakon)
Soldering pin socket to chip.
DuoX 2 has 2 boot modes.
- DuoX 2 Enabled
- DuoX 2 Disabled.
It is assumed that your machine is in the Power Off mode, ie
machine is not switched on
DuoX 2 Mode (Duo-X enabled)
Bank 0 bios for v1-v1.5 xbox Bank 1 bios
for v1-v1.6
- Power on Xbox with the "Power" button.
Original Bios Mode (Duo-X disabled)
- Power on Xbox with the "Eject" button.
Please note: To change between modes, the xbox must be put into
power off mode.
Additional information
How can I tell which version Xbox do I have?
- Please check xbox-scene.
Click here for the version page.
Examples of installs?
Wire
Direct
Header
Bios?
- It is your decision whether to flash it with a different bios. However, we
do not recommend it though. This is because we believe for most people, there is
really no need for it.
(However, due to restrictions of certain countries. Your chip might not come
with a working bios.)
What do I have to add to evox.ini?
- The latest version of EvolutionX should already contain the relevant
information.
ie.
0x01d5,"AMD - Am29F080B",0x100000
0x04d5,"FUJITSU - MBM29F080A",0x100000
0xadd5," HYUNDAI - HY29F080",0x100000
Xbox Live?
- If you ever log onto Xbox Live with the chip enabled. That particular xbox
eeprom would then be banned permanently.
|
